Omnia-6ex Use and Operation Manual – V: 1.20
32
Input & Output Menus
Input Menu
Output Menu
These two menus provide level adjustments for the left and right inputs and the absolute peak operating level of the
outputs. Note that the analog and digital Input and Output levels are affected equally by the settings of the Input and
Output Gain controls respectively. Choices governing the selection of the input audio source (Analog or AES/EBU),
signal mode (Stereo or Mono) and whether Pre-emphasis and De-emphasis is applied are also found on these menus.
See Pages 37-42 for full details on using the Input and Output menus.
These are generally “set once and forget” selections or parameters, usually adjusted during installation and then left
alone. In fact, they are called “System” parameters, and are not saved with a Preset. The “System” can be saved to
(and re-loaded from) the PCMCIA card using the Save To Card button in the System Menu. See Page 47 for details.
Encode (FM Mode Only)
This menu contains the adjustments for the DSP based
Stereo Generator. The Output Levels for Composite
Outputs 1 and 2, the Stereo Pilot Injection Level and
Phase, and the SCA Injection Level and Stereo
Separation parameters are adjustable here. Like the
Input and Output menu choices, these menu items are
typically adjusted during installation, and are saved as
a System Configuration (see above). See Page 43 for
full details.
Encode Menu
