Version November 2022_1
EN
11
Weld Control 630 User’s Manual
O . M . I . S . A . S r l
Via Verga 9/11
20845 Sovico (MB), Italy
3.4
Technical Specifications
OMISA
Weld Control 630
Electrical Specifications
Voltage
Frequency
Total rated power
Heating element rated power
Facing tool rated power
Hydraulic and control unit rated power
Power supply-side protection by breaker
Maximum length of any extension cable:
wire section 2.5 mm²
wire section 4.0 mm²
wire section 10.0 mm²
400 V · 3 ph.
*
N
50 Hz
11.65 kW
8.10 kW
1.85 kW
1.70 kW
32 A (slow blow)
20 m (22 yd)
75 m (82 yd)
100 m (109 yd)
Hydraulic Specifications
Maximum operating pressure
Cylinder section
Hydraulic oil
160 bar
31.40 cm²
Shell Naturelle HF-E 15
Operating Specifications
Operating range
Ambient temperature range
Ingress protection
Memory for welding reports
Data input
Data download
Supplied reducer inserts
315 through 630 mm
from – 20 °C to + 60 °C
(from – 5 °F to + 140 °F)
IP 54
10,000 report
RFID transponder reader,
optionally scanner
USB A v 2.0 (480 mbit/s)
315, 355, 400, 450, 500,
560 mm
Dimensions
Basic machine chassis
Facing tool
Heating element
Hydraulic and control unit
Carrying and storage rack
1200 × 900 × 900 mm
830 × 1000 × 230 mm
1050 × 800 × 60 mm
600 × 360 × 290 mm
870 × 970 × 700 mm
Weights
Basic machine chassis
Facing tool
Heating element
Hydraulic and control unit
Carrying and storage rack
All reducer inserts
173 kg
98 kg
38 kg
39 kg
40 kg
250 kg
When the third clamp of the machine chassis is fastened to
its movable carriage, to move with the first and second pipe
clamp, tees and elbows can be clamped for processing them.
Info
The referenced hydraulic oil is the product recom-
mended for the hydraulic system of the welder. If
a different brand, a different type is used, its tech-
nical properties
must
be equivalent: HEES un
-
