omi CHG 08, Operating And Maintenance Manual

Page: 11 / 82

710.1760.00.04-05 22/05/2014
11
MODELS A B H C D E F G I L M (Ø)
CHW 97, 130 760 760 1335 1250 767 100 972 100 / 84 1445 ¾”
CHO 97, 130 760 760 1335 1250 767 100 972 100 / 84 1445 1”1/2
CHG 75 760 760 1335 1250 767 100 972 100 / 84 1445 ¾”
CHW 149 / CHG 100 760 760 1385 1300 767 100 972 100 / 84 1510 ¾”
CHO 149 760 760 1385 1300 767 100 972 100 / 84 1510 1”1/2
MODELS: CHW 162 to CHW 1202; CHG 140 to CHG 365
MODELS A B H C D E F G I L M (Ø)
CHW 162, 192, 242, 292, 372
CHG 140, 180
1325 760 1570 1440 300 300 635 300 / 84 / 1”
CHW 432 to 752
CHG 225, 280, 365
1325 1520 1570 1440 300 300 635 300 / 84 / 1½”
CHW 1002 1325 2280 1570 1440 300 300 635 300 / 84 / 1½”
CHW 1202 1325 3040 1570 1440 300 300 635 300 / 84 / 2”
MODELS: CHW 1452 to CHW 3652
MODELS A B H C D E F G I L M (Ø)
CHW 1452,
1802
1525 3990 2170 2060 381
100 / / 200 310 / 3”
CHW 2052 1525 3990 2170 2060 381 100 / / 200 310 / 3”
CHW 2552 1525 3990 2170 2060 381 100 / / 200 310 / 3”
CHW 3152 1525 4990 2170 2060 381 100 / / 200 310 / 3”
CHW 3652 1525 4990 2170 2060 381 100 / / 200 310 / 3”
4. TRANSPORT/ PACKAGING/ STORAGE
4.1 REMOVING THE PACKAGING AND HANDLING THE CHILLER
Each chiller is supplied in a reinforced carton on a wooden pallet. The chiller must be kept in an upright
position at all times. NOTE: Tilting the chiller may cause serious damage!
Procedure:
* Remove the strapping from the carton. Always wear safety gloves when using scissors
or other tools to cut the straps.
* Remove the carton.
* Raise the chiller using suitable lifting gear.
NOTE: If the chiller is fitted with eyebolts, these must be used for lifting it in accordance with the ap-
plicable safety standards.
If the chiller is not fitted with eyebolts, the lifting gear must be appropriate for the weight of the
chiller, as indicated on the identification plate and in the Annex.