34 |
P a g e
D.1 Industry Canada Statement
Contains Industry Canada ID IC: 7438A-CYO5168M5
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement
This device has been designed to operate with antennas having a maximum gain of 2.2 dBi.
Antennas having a gain greater than 2.2 dBi are strictly prohibited for use with this device.
The required antenna impedance is 50 ohms.
D.2 CE Statement
The following alert sign indicates that there are restrictions on usage of the
equipment in regards to power limitations on Equivalent Isotropic Radiated
Power (EIRP) levels in the European Community.
The Following Are User Restrictions:
•
Combinations of power levels and antennas resulting in a radiated power level above
10 mW - EIRP for Direct Sequence Spectrum (DSSS) devices are considered as not
compliant, and are not allowed for use within the European Community and other
countries that have adopted the European R&TTE directive 2014/53/EU or the CEPT
recommendation ERC/REC 70-03 or both.
•
This device has been designed to operate with antennas having a maximum gain of 2.2
dBi. Antennas having a gain greater than 2.2 dBi are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms.
Singapore
