9 |
P a g e
2.4 Dimensions and Mounting
The ZW-REC includes all required hardware for mounting. To mount the ZW-REC position unit
where required. Mark the location of the top center of the unit. Refer to
Figure 5
to mark and
drill the two screw holes as indicated. Use the included drywall anchors if needed and mount
the bracket so that the bracket clips are facing up. Align the back of the unit over the three
clips. When engaged slide downward and snap the unit in place.
•
When mounting the unit be sure to leave room on the top for the Antenna
and on the bottom and side for the cables.
•
Mount the unit away from any large metal obstructions such as posts,
catwalks or large machinery.
•
For best wireless range, do not co-locate the ZW-REC with other 2.4GHz
wireless equipment such as wireless routers or access points.
•
For best wireless range, elevate the ZW-REC and keep a direct line of sight
to End Devices.
Figure 5. Mounting Dimensions
