5-12
Receiver Operation
5
For UWTC-REC1-NEMA, UWTC-REC2-D-*-NEMA
Mounting ears are built-in to your receiver enclosure The diagram below
shows dimensions and mounting hole location. Rubber bumpers have also
been supplied with your receiver should you wish to use the device on a desk
or a work bench next to your PC.
TIP: Mounting your receiver on a wall away from your PC will provide better
signal strength and help to maximize system range.
When mounting your receiver, care should be taken to make sure it is as far
away from any metal objects. If nearby metal gets too close to your receivers
antenna, it has the potential to interfere with the way the unit receives data
and may cause signal lose or possibly even the inability to communicate at all
with your connector/transmitter.
Figure 5-17. UWTC-NEMA Mounting
147.1 (5.79)
56.9 (2.24)
Ø3.8 (
0.
15)
160 (6.30)
90 (3.54)
DIMENSIONS mm (in)
NOTE:
