Connector Operation
4
4-5
STEP 3. Programing your settings into a connector/transmitter.
After starting the setup utility program this will be the first screen you will see.
Click the “Next >” button to proceed and continue setting up your connector/
transmitter. Each screen will provide instruction details on how to proceed.
If you have not already connected your connector/transmitter to a USB port
on your PC you must do this now before continuing. After your unit has been
connected click the “Next >” button to proceed and continue setting up your
connector/transmitter.
Figure 4-5.
Welcome To
End Device
Configuration
Wizard
screen.
Figure 4-6.
Connect The
End Device
Screen
