Omega TRCN443, User Manual

Page: 18 / 26

TURBIDIMETER
READ/ SET UP
PASSWORD
___
LANG.: PORT./
/SPANISH ENGLISH
CONFIG. INSTR.?
/ YES NO
RANGE
0 - 10 NTU
FACTORY DEFAULT?
/ YES NO
CONFIRM?
/ YES NO
ON LINE CAL.:
MANUAL / AUTO
CAL. POINTS:
1 / / 3 2
CALIBRATION
Pt.1 0.3000NTU < >
CALIBRATION
Pt.2 1.0000NTU < >
READING MODE:
/ CONTIN. AVER.
TIME BETWEEN
READINGS:5s < >
Go to Page 18 A
Go to Page 18
A
12.
Equipment Operation - Set Up
17
A Password is required in order to access the
. Press in sequence , and
SET
UP <SEL> <ENT> <ESC>
In order to select the desired language, press
key until the desired option flashes, then
press key to confirm .
<SEL>
<ENT>
Press until flashes then press
key.
<SEL> Set Up
<ENT>
User can program the instrument, such as Default
Calibration, On Line Calibration and more. If chosen
,
the last configuration will remain in effect. Press
key until the desired option flashes, then press
Key to confirm .
No
<SEL>
<ENT>
The Range cannot be changed. It is default from
You can calibrate the instrument as factory default.
Choose
and confirm and the instrument will
calibrate as factory default! This option is offered in
case the user does have any other way to perform
a calibration procedure.
Yes
The user will be allowed to adjust the Turbidity
value read at sample. Press
until
flashes then confirm by presssing .
<SEL> MAN
<ENT>
User will be able to choose the number of calibration
Points. Press
key until the desired opiton
flashes and confirmed by pressing
<SEL>
<ENT> .
User will be able to adjust the value of the
calibration points chosen. Refer to page 16 (Note
A) for instructions on how adjust this value.
User can choose between the following Reading Modes:
Continuous - Read continuously after time is set
Average - Reads the average after time is set
User can program the time between Readings for
Average Reading.
Refer to Page 16 (Note A) for instructions on how to
adjust this time.