3
Congratulations on your purchase of the RS-7K2 Keyless Entry and Remote
Starter unit. The RS-7K2
offers you the convenience of locking and unlocking
your vehicle’s doors with the press of a button, and the starting of your vehicle's
engine from the comfort of your home or office, allowing your vehicle to warm up
in winter and cool down in summer. The RS-7K2 can also be optionally config-
ured to remotely open your vehicle’s trunk.
We highly recommend that this system be professionally installed, as the
complexity of the modern automobile and the nature of circuits to be accessed is
often beyond the abilities of most do-it-yourselfers.
There are several important safety considerations with using and installing
the RS-7K2
keyless entry and remote starter. Among them are:
- This unit is for vehicles with an automatic transmission only. Installation in a
vehicle equipped with a manual transmission can result in property damage or
personal injury.
- This unit is for fuel injected gasoline or diesel engines.
- Children should not be left unattended in, or be allowed to play with the activat-
ing transmitters of any remote starter equipped vehicle.
- Do not use the remote starter feature in an enclosed garage or other structure.
Introduction & Safety Considerations
38
The RS-7K2 comes with two pre-programmed transmitters, but up to four transmitters
total may be programmed to operate the RS unit. Each transmitter has its own
unique “code”, and when a new transmitter is programmed, all previous codes will
be erased. So when an additional or replacement transmitter is added to operate
Programming Transmitters
doorlocking systems or 3 seconds for certain vehicles having vacuum pump
actuated doorlocking systems.
Feature
#
3- “Double Unlock Pulse” is for certain newer vehicles requiring two
pulses for unlocking the doors.
Feature
#
4- “Engine Running Time” selects the remote start engine run period to
be 15 minutes or 30 minutes.
Feature
#
5- “Starter Cranking Time” slightly lengthens the starter engagement,
which is useful for vehicles which may have difficult-to-start engines.
Feature
#
6- “1 Or 2 Pulse Remote Start Activation” changes the Pink “Start Acti-
vation Input” wire’s operation so that two Negative pulses instead of one is
required for an external device to activate the remote starting feature. This
feature, explained on page 24, will allow an existing keyless entry system to
activate the RS unit’s remote start feature.
