30
Positive Pulse System Using External Relays
Doorlock
Actuators
Blue Wire
Green
Wire
+
Doorlock
Switch
85
86
87a
87
Coil
30
85
86
87a
87
Coil
30
+
+
+
+
+
Unlock
Lock
Vehicle's Doorlock
Relay Control Unit
Control
Module
Red Connector
11
(Two 12-Gauge)
Red Wires:
Co12 Volts Input
Connection Required
.
Connect both Red wires to constant 12 Volts. The
source used must supply adequate amperage. The most common sources are
the battery's Positive terminal and the ignition switch wiring harness. Good reli-
able connections and use of the included fuses are a must. Please note that
some Ignition Switches have the electrical
switch as part of the mechanical switch; oth-
ers have the electrical switch lower on
the steering column and connected
to the mechanical switch by a linkage.
The ignition switch wiring harness is
the best source for this and the
ignition #1 and accessory
wire connections.
W I R I N G - 5 Wire Connector
Two Typical “Electrical”
Ignition Switch Locations
OR
