Page - 6
Page - 11
The Installer Programmable Features
The second group of features, the Installer Programmable Features, are accessed as
the second level of features’ programming, which is pressing the Valet Switch 10
times instead of 5 times when entering Programming Mode (page 9). Caution:
These features have a critical affect upon the system’s operations, and in many
cases, also upon the system’s wiring connections. These features should
NEVER be changed, except by the installer or other qualified professional. This
booklet should be consulted for the proper wiring connections, as associated with
these programmable features.
Feature #1 Remote Start Run Time
Factory Default Setting
10 Minutes (
press
brake pedal 1x to program
)
Options:
5 Minutes
(
press
brake pedal 2x to program
)
15 Minutes
(
press brake pedal 3x to program
)
20 Minutes
(
press
brake pedal 4x to program
)
This feature sets the period of time that the engine will run after being remotely
started. If the engine is not stopped by controller/transmitter command or a safety
circuit violation, the engine will automatically stop upon the expiration of the
selected time period. Caution: The remote engine starting feature should
NEVER be used when the vehicle is parked in an enclosed structure or garage.
Feature #2 Steady/Flashing Lights During Remote Start
Factory Default Setting
Steady (
press
brake pedal 1x to program
)
Option:
Flashing (
press
brake pedal 2x to program
)
This Feature configures the operation of the vehicle’s parking lights during the
remote start operation. The default setting turns on the parking lights during remote
start; the other setting flashes the parking lights on and off during remote start.
Valet Mode
The system may be placed into a “valet mode” which prevents the
remote start feature from being activated. It also disables confirmation
chirps when unlocking the doors. Valet Mode should always be used when
you do not wish for remote starting to be operated, such as when you have
your vehicle serviced.
The Valet Switch, is used to engage Valet Mode:
•
With the system in an unlocked state, press and hold the Valet Switch
for 3 seconds; the Status Light will light steady, to indicate Valet Mode, and
stay illuminated continuously while the system is in Valet Mode. The lights
will flash twice.
Once in Valet Mode, an attempt to remote start will result in no response
from the system. Keep this in mind if remote start stops functioning. The
system may have accidentally been placed in valet mode.
•
To turn off Valet Mode, simply press & release the Valet Switch once.
The Status Light will turn off.
Using The Valet Switch
Pit-Stop Feature
This feature allows you to leave your vehicle and keep the engine run-
ning for quick errands. To use this feature, have the engine running nor-
mally from the ignition switch, have the gear selector in “park”, and your
foot off of the brake pedal. Press the Valet Switch twice; the parking lights
will illuminate; then turn the ignition off. The engine will remain running for
the programmed run time, or it will turn off if another transmitter signal is
received, a safety circuit is violated, or if the Valet Switch is pressed.
Use the step-by-step instructions on page 9 to change any of the Installer
Programmable Features, along with the feature’s option choices and related
programming controller/transmitter button assignment found in the following
individual feature descriptions.
