This device complies with FCC Rules part 15. Operation is subject to the
following two conditions, (1) This device may not cause harmful inter-
ference and, (2) This device must accept any interference that may be
received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifica-
tions could void the user's authority to operate the equipment.
Omega Research and Development, Inc. www.caralarm.com
Page - 2
Coin batteries used in the transmitter which is used to operate this
system may contain Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Page - 15
Table of Contents
Introduction/System Overview ................................................ 3-4
Valet Switch Overview ................................................................
3
Transmitter Overview ...................................................................
4
Using the RS-210-DP System ................................................. 5
Unlocking The Doors ...................................................................
5
Remote Starting ............................................................................
5
Using The Valet Switch .......................................................... 6
Valet Mode ...................................................................................
6
Pit-Stop Feature ............................................................................
8
Other Remote Start Features ................................................... 7
Turbo Timer Feature ....................................................................
7
Status Light Functions ............................................................. 7-8
Transmitter Protection ............................................................. 8
How to Program Transmitters ................................................. 9
How to Program Features ........................................................ 9-10
User Programmable Features .................................................. 10-11
Installer Programmable Features ............................................. 11-14
Complete Programmable Features Matrix .............................. 15
Limited Lifetime Warranty .............................................. Back Cover
- IMPORTANT -
The RS-210-DP has many programmable features which can offer
more operations than those described in the basic system instruc-
tions. Mostly, these extra features and operations are configured
at the time of installation. Please read the sections of this manual
which explain programmable features, and consult your installer
for specifics on how your system is configured, and for installation
options which can be added to system after installation.
Complete Programmable Features Matrix
USER Features
Ignition on, off, then press Valet Switch 5 times (BLUE Status Light).
# Feature
Brake Pedal x 1 Brake Pedal x 2
Brake Pedal x 3
Brake Pedal x 4
1
Remote Start Run Time
10 Min.
5 min.
15 min.
20 min.
2
Steady/Flash Lights Rem. Start Steady
Flashing
INSTALLER Features
Ignition on, off, then press Valet Switch 10 times (BLUE Status Light).
1
Remote Start Activation Pulses 1
2
3
4
2
“Tach Wire” or “Tachless “
Tachless
Tach
Data Tach
3
Gasoline or Diesel Engine
Gasoline
Diesel
4
Sat. Port Green Wire Function Starter
Pulse After Start
Pulse After Stop
Accessory Output
5
Ext. Starter Cranking Time
.7 (minimum)
1.25
1.75
2.5 (maximum)
6
Unlock Functions
.8 second
3 Seconds
Double Unlock
N/A
7
Turbo Timer
OFF
1 min.
2 min.
3 min.
