Page 4
The system may be "Disarmed" by one of 3 methods:
1)
RFID Disarming: Approach the vehicle with the Remote Control
- Once the Remote control is 2-5 meters from the vehicle the alarm will Disarm.
2) Remote Control Disarming: Press & Release the Button on
the Remote Control
Upon Disarm:
• The siren will chirp twice.
(4 chirps if alarm has activated & reset)
• The parking lights will flash twice.
(4 times if alarm has activated)
• The doors will unlock.
(If an optional interface is connected)
• The starter interrupt will disengage.
• The LED Status Indicator will turn “Off”, or begin flashing rapidly
if the Automatic Rearming feature is programmed on.
3) Emergency Override:
(Disarming the alarm without the Remote)
Step 1:
With the system in the armed condition, enter the vehicle via the driver's
door
(be aware that the alarm will activate when the door is opened)
.
Step 2:
Using your key, turn the vehicle’s ignition to the "On" position.
Step 3:
Within 20 seconds, enter your PIN code (1-12) by Pressing the Valet/
Override Switch. (i.e.: if pin code is 8, press valet switch 8 times)
-The activated system will disarm one second after code is entered.
THE SIREN WILL
CHIRP TWICE
THE PARKING LIGHTS
WILL FLASH TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
THE SIREN WILL
CHIRP TWICE
THE PARKING LIGHTS
WILL FLASH TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
Disarming the Alarm
THEN WITHIN
20 SECONDS
Emergency Override
...... 2-5 meters ..........
RFID must be “On”
(see page 2)
ENTER PIN-CODE
