![background image](http://html1.mh-extra.com/html/omega/iserver-2-series/iserver-2-series_user-manual_4179675027.webp)
25 |
M 5 7 9 1
6.5.2
Relay 1 and Relay 2
The Relay 1 and Relay 2 tabs allow users to configure the first and second relays of the
iServer 2. The initial relay states can be changed between Normally Open and Normally
Closed
. The relay triggers and input devices they apply to can be selected in this window as
well. For more information regarding the relay connector, refer to section 4.3 Digital I/O and
Relays
.
Important:
When wiring the included terminal block connectors to access the digital I/O,
alarms, or relays, it is recommended that users ground the unit by connecting a
wire to the chassis ground of the connectors shown in Figure 9.
Figure 36: IServer 2 Relay notification configuration window