36 |
M 5 7 9 1
Step 6:
Click Internet Protocol Version 4
(TCP/IPv4) to highlight the selection
and then click Properties.
Step 7:
Click Use the following IP
address
and enter an IP address
that uses the same network part
(the first nine digits of the IP
address) but with a unique host
part (the last three digits of the IP
address) as the static IP Address
assigned to the iServer 2 in Step
1.
For example, if the Static IP
assigned to the iServer 2 is:
192.168.3.200,
then the IP address
entered in the text box should be:
192.168.3.XXX
(the XXX should be
any value that is NOT 200)
Step 8:
Click OK to finalize
Figure 51: TCP/IPv4 and subnet mask properties for micro-USB 2.0
connection
Figure 50: Unidentified Network Properties