![background image](http://html.mh-extra.com/html/omega/gw-001-series/gw-001-series_user-manual_736946034.webp)
34 |
M 5 7 9 0
8.4
How to Remove a Paired Smart Sensor from a Gateway
To remove a paired Smart Sensor (such as the SS-001) from a Gateway, follow the steps below:
Step 1:
Log in to the Layer N Cloud account associated with the
paired devices.
Step 2:
From the Layer N Cloud device readings page, identify the
Smart Sensor that will be removed, and click the Trash Can
icon .
8.4.1
How to Move a Paired Smart Sensor to a Different Gateway
To move a paired Smart Sensor (such as the SS-001) to a different Gateway, follow the steps below:
Note:
When moving a paired Smart Sensor to a different Gateway, alarm and event thresholds may be
triggered and notifications based on user preference may be delivered. Notifications sent as a
result of the re-pairing process may be disregarded.
Step 1:
Navigate to the Layer N Cloud Portal that is associated with the Smart Sensor and remove the Smart
Sensor from the account.
Step 2
: Ensure the unit is being powered with either a USB connection or batteries. Press and hold the
Pairing Button on their Smart Sensor for 8 seconds so that the LED Status Indicator blinks red to
factory reset the device, then release the pairing button.
Note:
The Pairing Button for the SS-001-RUG is in a pinhole on the underside of the device. Use a
paperclip to press and hold the pairing button for 8 seconds so that the LED Status Indicator
blinks red to factory reset the device, then release the pairing button.
After the factory reset, the LED Status Indicator on the Smart Sensor will turn Amber/Orange indicating the
device is in pairing mode and is ready to be paired to a new Gateway.
Figure 50: Layer N Cloud UI Smart Sensor readings