Omega FUZZY LOGIC CN4800, Manual

Page: 93 / 102

91
5. PARAMETER LIST
* See page 44~46 for lock level.
* E.U.: Engineering Units
* D.E.U. : Deviation engineering Units
Display Name
Lock
level
Description
Initial
value
during
shipment
Remarks
Parameter locking
(setting range: 0 ~ 3)
Displays the set value (SV) by
remote input.
(Displayed range: 0 to 100% FS E.U.)
Displays the output value of Copntrol
Output 1.
(display range: —3.0 ~ 103.0%)
Displays the output value of Copntrol
Output 2.
(display range: —3.0 ~ 103.0%)
LOCK
CAS
OUT1
OUT2
MOD
AT
D-SV
STAT
TIME
Lock level
Remote set
value
Control output 1
output value
Control output 2
output value
Control
mode
Autotuning
command
Sub-Set point
Ramp/soak
present point
Ramp/soak
remaining-
operation
time
0
3
3
3
2
1
2
1
1
2
—
—
—
2-setting function sub-set point
(setting range: 0 ~ 100%FS E.U.)
Ramp/soak proceeding status is
displayed with a symbol. No setting
(display: OFF/1-RP/1-SK/2-RP/2-
SK/3-RP/3-SK/4-RP/4-SK/END)
The ramp/soak proceeding status is
displayed with the time for remaining
operation. When the time for
remaining operation exceeds 100
hours, the hours display of "xxxh" is
made. When the time is under 100
hours, the hour/min display of
"xx.xx" is made. No setting.
0%FS
E.U.
—
—
No setting
Not displayed
unless the 2-setting
function is provided.
Not displayed
unless the
ramp/soak function
is provided.
Setting
Setting
Mode
Auto
Manual
Remote
Autotuning
Stop
Normal autotuning
Low-PV type autotuning
Not displayed when
the remote SV
function is disabled.
No setting
Not displayed
unless control
output 2 is provided.
not
displayed when the
remote SV function
is disabled.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com