33
Operation Mode
Parameter Setting Mode
Displays measured and set
point.
Displays information on loop*
break, heater break
*
, main-unit
error, auto-tuning, and manual
operation.
Changes set point.
Displays and changes
various parameters.
*
indicates an option.
SEL
Continue to press
key for about 3 sec
Make no operation
for 1 min
III. OPERATION PROCEDURE
1. OPERATION MODE/PARAMETER SETTING MODE
The operation of this device includes the Operation Mode where
measured and set values are displayed and the Parameter Setting
Mode where various parameters are set.
To switch between the operation and parameter setting modes,
continue to press the
SEL
key for about 3 sec.
2. VIEWING PARAMETERS
1. Enter the parameter setting mode. (continue to press
SEL
key for
about 3 sec)
2. Display the target parameter with the
SEL
,
, or
key.
NOTES: No parameter is displayed if its parameter lock setting is
illegal or if its corresponding option has been mounted in the
system.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for FUZZY LOGIC CN4800
Page 2: ...M1791 Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOUR...
Page 47: ...45 ogy Group Quality Instrumentation Guaranteed 888 88 SOURCE...
Page 100: ...98 MEMO ogy Group Quality Instrumentation Guaranteed 888 88 SOURCE...
Page 101: ...99 MEMO ogy Group Quality Instrumentation Guaranteed 888 88 SOURCE...
