3 Pin Satellite Relay Port (RED)
GREEN WIRE - START (-) PROGRAMMABLE OUTPUT
This output provides a 250mA negative pulse when the large VIOLET start wire is
active. It can also be programmed for PULSE AFTER START, STATUS, or DOME
-
LIGHT SUPERVISION. See installer programmable feature #5.
CONNECTION:
If a negative start output is needed, connect this directly to the
vehicle’s negative starter circuit. Otherwise, use a relay to convert this to a high
current circuit.
RED WIRE - CONSTANT (+) OUTPUT
This output provides a 500mA positive output to drive added relay coils.
This provides a 250mA negative output slightly before & during the primary
ignition output. This output is programmable. See installer feature #6.
CONNECTION:
This is typically used to activate immobilizer bypass modules.
Connect it directly to the module’s activation input.
BLUE WIRE - STATUS (-) PROGRAMMABLE OUTPUT
3 Pin Door Lock/Unlock Port (RED)
GREEN WIRE - LOCK (-) OUTPUT
This provides a 0.8 second 250mA negative pulse for any locking operations. The
pulse timing is programmable by installer feature #8.
CONNECTION:
Connect this to the vehicle’s lock circuit for negative pulse systems.
Otherwise, a doorlock interface and/or relays are required to convert the output.
BLUE WIRE - UNLOCK (-) OUTPUT
CENTER PIN (EMPTY) - CONSTANT (+) OUTPUT
This output provides a 500mA positive output to drive the positive pin of added
relay coils. It is used for Omega prewired doorlock interfaces.
This provides a 0.8 second 250mA negative pulse for any unlocking operations.
The pulse timing is programmable by installer feature #8.
CONNECTION:
Connect this to the vehicle’s “all door” unlock circuit for
negative pulse systems. Otherwise, a doorlock interface and/or relays are required
to convert the output.
Status Lights
Valet / Programming Button
All Models Except The RS-170:
The status light is built into the window mount
antenna. It is best for these to be highly visible for maximum visual theft deterrence.
RS-170:
This system includes a separate status light/valet button combo. It can be
mounted in a 9mm hole in the dash.
Most Models:
The valet button is built into the window mount antenna.
RS-170:
The valet button is built into the status light.
9
