![background image](http://html1.mh-extra.com/html/omega/dfg-rs5/dfg-rs5_user-manual_4017115028.webp)
Model DFG-RS5 Digital Force / Torque Indicator
User’s Guide
27
11.1 Calibration Password
Select
Calibration
from the sub-menu. The display appears as follows:
To set the password, select
Enabled
, then
Set Password
. Use the
UP
and
DOWN
keys to increment and
decrement the value, from 0 to 9999. When the desired value has been selected, press
ENTER
, then
ESC
to exit the sub-menu.
11.2 Menu Key Password
If enabled, every time the
MENU
key is selected, a password must be provided. Select
Menu Key
from
the sub-menu. Follow the same procedure as described above.
11.3 Sensor Lock
The indicator may be configured to operate only when a particular sensor is connected. To enable,
ensure that the appropriate sensor is connected. Then, highlight
Sensor Lock
in the sub-menu, and
press
ENTER
.
After configuration, if a different sensor is connected, the display appears as follows:
Connect the correct sensor, then press
ENTER
to continue. If the correct sensor is not available, contact
Omega for further instructions.
11.4 Locking Out Other Keys
Other keys may be locked out individually. Select any combination of keys (
UNITS
,
MODE
,
ZERO
,
DATA
,
CLEAR
,
POWER
) by pressing
ENTER
in the
Passwords
sub-menu. Pressing a locked key will
prompt the message “KEY PROTECTED” instead of performing the key’s function.
11.5 Password Prompts
If passwords have been enabled, the following will be displayed when pressing the
MENU
key or
accessing the
Calibration
section:
WRONG SENSOR
CONNECTED
Connect sensor
SN 1234567
then press ENTER.
CALIBRATION PASSWORD
*
Disabled
Enabled
Set Password
(0000 – 9999)
5000
PASSWORDS 2
Zero Key
Data Key
Clear Key
Power Key