Page 46
FEATURES PROGRAMMING CHECKLIST
This checklist will assist you when programming features. Before
attempting feature programming, please carefully read pages 24 and 25 for
the entire features programming details and instructions to become familiar
with the features and the programming procedure. A detailed explanation
of each of the programmable features is found on pages 26 through 32.
To best use this checklist, mark each applicable box with “\” next to the
feature to be changed before entering features Programming Mode. As each
feature is programmed, change its mark to “
X
”.
To program features, follow these steps:
Step 1 - Turn the ignition “off”, and press the Valet Switch 5 times.
(the system will respond a siren chirp, then briefly
sounding the siren and the Status Light begins
flashing Red)
Step 2 -Press the Valet Switch the same number of times as the
desired feature number.
(the system will acknowledge the Valet Switch entry
by repeating the same number of siren chirps and the
Status Light flashes in Red an equal amount)
Step 3 -Press the transmitter’s "Arm/Lock" button to turn the feature
“on” or press the "Disarm/Unlock" button to turn the feature
“off”.
(turning the feature “on” is indicated by one siren chirp and
the Status Light being on; turning the feature “off” is
indicated by two siren chirps and the Status Light being off)
Repeat - Steps 2 and 3 for each feature to be changed
If no programming activity occurs within a 10 second
period, the Features Programming Mode will expire.
The system exiting features Programming Mode
is indicated by the siren briefly sounding.