background image

Notes

:

-

There is no time limitation for the second pressing of the “Disarm/Un-
lock” button.  Once the button is pressed and released to Disarm the
system, every subsequent pressing of the “Disarm/Unlock” button will
produce the “unlock all doors” output, the single siren chirp and parking
and dome light illumination period.  When the system is next armed, by
any of the three methods, the operation is reset so the next use of the
“Disarm/Unlock” button will result in the system Disarming and pro-
ducing the “unlock driver’s door only” output.

-

When disarming a system configured for Driver’s Door Priority, the user
has the option of Silent Disarming (by pressing twice the Auxiliary Out-
put #2 button), and then pressing the “Unlock/Disarm” button.  When
the remaining doors unlock, the system will chirp the siren once.

Emergency Override:

In the event that your transmitter is lost, damaged, or its batteries have

become exhausted, the Valet Switch and the vehicle’s ignition key may be
used to disarm the system.

To Disarm the System without using a Transmitter:

Step 1. With the system in the armed condition, enter the vehicle via the

driver's door (be aware that the system will activate to an alarm
condition when the door is opened).

Step 2. Using the ignition key, turn the vehicle’s ignition on.

Step 3. Within 5 seconds, press and release the Valet Switch once.  The

system will disarm.

DISARMING BY EMERGENCY OVERRIDE

ENTER THE VEHICLE

AND USE YOUR KEY TO

TURN THE IGNITION ON

     WITHIN 5
   SECONDS OF
 TURNING THE
IGNITION ON,
PRESS AND RELEASE
THE VALET SWITCH

THE SYSTEM WILL DISARM

A procedure which separate, but similar, to an Emergency Override is the

Easy Valet mode (page 18), which prevents the system from performing any
automatic arming operations which may be programmed to occur.

Page 11

Summary of Contents for Crime Guard 850i3

















































Reviews: