![Omega Crime Guard 850i3 Operation Manual Download Page 34](http://html1.mh-extra.com/html/omega/crime-guard-850i3/crime-guard-850i3_operation-manual_3929215034.webp)
chirps, and the Status Light flashing nineteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter’s "Arm/Lock" button to
turn on the Door Activated Vehicle Recovery feature (the siren will chirp
once) or the "Disarm/Unlock" button to turn this feature off (the siren will
chirp twice).
Feature #20 Transmitter Activated Vehicle Recovery
(Factory Default Setting Off)
This form of the Vehicle Recovery feature gives you the option of
activating the Vehicle Recovery operation from the transmitter in the event
that you are forced from your car. “Transmitter Activated” Vehicle Recov-
ery is one three methods of activating this feature, which is explained on page
22.
Programming Transmitter Activated Anti Car-Jacking:
Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed
and released twenty times. The system’s response will be twenty siren
chirps, and the Status Light flashing twenty times, pausing, then repeating.
Within 10 seconds, press and release the transmitter’s "Arm/Lock" button to
turn on the Transmitter Activated Vehicle Recovery feature (the siren will
chirp once) or the "Disarm/Unlock" button to turn this feature off (the siren
will chirp twice).
Page 34
Feature #21
Chirp Confirmation
(Factory Default Setting On)
This feature allows the permanent removal of the system’s chirping the
siren as an audible confirmation when performing functions such as Arming
and Disarming. Please note that utilizing this feature to remove the
confirmation chirps does not affect siren chirping operations associated
with the ATV
TM
Warning, sensor prewarning or Programming Mode.
Programming the Chirp Confirmation:
Follow Steps 1 to 4 on page 24; at Step 4 the Valet Switch will be pressed
and released twenty one times. The system’s response will be twenty one
siren chirps, and the Status Light flashing twenty one times, pausing, then
repeating. Within 10 seconds, press and release the transmitter’s "Arm/
Lock" button to turn the Chirp Confirmation on (the siren will chirp once)
or the "Disarm/Unlock" button to turn the Chirp Confirmation off (the siren
will chirp twice).