background image

This device complies with FCC Rules part 15. Operation is subject to the
following two conditions, (1) This device may not cause harmful inter-
ference and, (2) This device must accept any interference that may be
received, including interference that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifica-
tions could void the user's authority to operate the equipment.

One or more of these patents may apply to this product:

#5,612,669  #5,654,688  #5,663,704  #5,729,191  #5,818,329  #5,612,578  #5,739,747

#382,558  #385,878  #5,750,942  #5,739,748  #5,719,551  #406,107  #701,285

#5,973,592  #5,982,277  #5,986,571  #6,011,460  #6,037,859  #6,049,268  #6,130,605

#6,130,606  #6,140,938  #6,140,939  #6,150,926  #6,144,315 #6,184,780 #6,188,326

#6,243,004  #6,249,216  #6,275,147  #6,297,731  #6,320,514  #6,320,498

Foreign Patent #199700312  #EP0817734B1 #98906445.6 #2,320,248 #701,285

Omega Research and Development, Inc.

www.caralarm.com

Page - 2

Coin batteries used in the transmitter which is used to operate this
security system may contain Perchlorate Material - special handling
may apply.  See www.dtsc.ca.gov/hazardouswaste/perchlorate

Complete Programmable Features Matrix

  4th Option: Crank Only (Lock & Unlock)

USER Features

Ignition on, off, then press Valet Switch 5 times (RED Status Light).

   #   Feature

  Default Setting             Option

     2nd Option

     3rd Option

   1 SecureCode

 1 & 0                     2 stages, of up to 9 presses each (total of 99 possible combinations)

   2 Last Door Arming

OFF  (L)

ON w/o doorlock (U) ON w/ doorlock (2)

   3 Automatic  Rearming

OFF  (L)

ON w/o doorlock (U) ON w/ doorlock (2)

   4 Starter Interrupt Functions

Alarm only (L)

Off (U)

Automatic (2)

Alarm+AntiGrind  (3)

   5 Ignition  Activated  Override

OFF (U)

ON (L)

   6 Doors Lock With Ignition On

ON  (L)

OFF (U)

   7 Doors Unlock With Ignition Off ON  (3)

OFF (L)

o/p 1 only (U)

o/p 2 only (2)

   8 Open Door Bypass to above

ON  (L)

OFF (U)

   9 Confirmation  Chirps

ON (L)

OFF  (U)

exc.  Valet  (2)

Valet only (3)

 10 Confirmation Chirp Volume

Medium Loud  (2) Low (L)

Med Lo (U)

Loud (3)

 11

Activated Alarm Cycle

 30 Seconds (L)

60 Sec. (U)

90 Sec. (2)

120 Sec. (3)

 12 Lights On Upon Disarm

ON  (L)

OFF (U)

 13 Disarm Upon Trunk Release

ON  (L)

OFF (U)

 14 Arming  Delay

3 Seconds (L)

15 Seconds (U)

30 Seconds (2)

45 Seconds (3)

 15 Steady Siren / Pulsed Horn

Steady Siren (L) Pulsed Horn Lo (U)

Pulsed Med. (2)

Pulsed Hi (3)

 16 Alarm Functions Bypass

OFF (U)

ON (L)

 17 Ignition  Anti-Carjacking

OFF (U)

ON (L)

 18 Door  Anti-Carjacking

OFF  (U)

ON (L)

 19 Remote  Anti-Carjacking

OFF (U)

ON (L)

 20 Open Door Warning at Arm

OFF (U)

ON (L)

 21 Remote Start Activation            III/Start Once (U)   III/Twice (L)

Lock & Unlock (2)

 22 Remote Start Run Time

10 Min. (U)

5 min. (L)

15 min. (2)

20 min. (3)

 23 Steady/Flash Lights Rem. Start Steady (L)

Flashing (U)

 

INSTALLER  Features Ignition on, off, then press Valet Switch 10 times (GREEN Status Light).

  1

Doorlock  Functions

.8 second (L)

3 Seconds (U)

Double Unlock (2) Total Closure (3)

  2

Light  Relay  Functions

Dome Light (L)

Lock (U)

Ignition (2)

Accessory (3)

  3

Horn  Relay  Functions

Horn, med. (L)

Unlock  (U)

Ignition (2)

Accessory (3)

  4

Turbo  Timer

OFF  (L)

1 min. (U)

2 min. (2)

3 min. (3)

  5

Manual Trans. Remote Start        OFF (U)                ON (L)

  6

Engine  Detection

Hi  Sensitivity(L) Lo Sensitivity (U)         Tach (2)                   Datatach (3)

  7

Ext. Starter Cranking Time       .75 (minimum) (L) 1.00 (U)

1.5 (2)

2.25 (maximum) (3)

  8

Remote Start Relay

Ignition (L)

Accessory (U)

Starter (2)

  9

Arm/Disarm or Add. Chan.

Arm/Disarm (L)

Arm/Ch. 5 (U)

Ch. 4 / Disarm (2)

Ch. 4 / Ch. 5 (3)

 10 Gasoline or Diesel Engine

Gasoline (L)

Diesel (U)

Page - 39

Summary of Contents for Crime Guard 810i6





















Reviews: