![background image](http://html2.mh-extra.com/html/omega/cl1000-series/cl1000-series_user-manual_4000927006.webp)
this device as it contains important information relating to safety and EMC.
Failure to follow all safety precautions may result in injury and or damage
to your calibrator. Use of this device in a manner not specified by the
manufacturer may impair protection provided within the unit.
IEC symbols Description
Figure 1. IEC symbols
1.4 Statement on
Marking
It is the policy of OMEGA to comply with all worldwide safety and EMI/EMC
regulations that apply. OMEGA is constantly pursuing certification of its
products to the European New Approach Directives. OMEGA will add the CE
mark to every appropriate device upon verification of compliance.
1.5 General Description
The CL1000 is a portable, rugged, benchtop, dry block calibration source with
a built-in precision PID digital controller. The calibrator is used to test and
calibrate temperature probes. The probe well can be set to any temperature
between a11 to 260°C (a20 to 500°F)
1.6 Available Models
*Add suffix “-230 VAC” for 230 VAC models
CL1000 Series Introduction
1
1-2
Caution, refer to accompanying
documents
Caution, hot surface
115 VAC @50/60Hz (Domestic Models)
230 VAC @50/60Hz (European Models)
Caution, risk of electric shock
Model No.* Well Style
1/16"
1/8"
5/32" 3/16"
1/4" 1.5mm 2.0mm 3.0mm 4.5mm 6.0mm
CL1000A
Standard
1
2
1
1
1
CL1000B
Standard
2
1
2
CL1000C
Standard
2
2
2
CL1000D
Metric
1
1
1
1
1
HOLE SIZE
Qty.