Page 73
EG-1800
ATV
SUPPLEMENT
14) Lights On 30 Or 5 Seconds Upon Disarm: Default 30 Seconds. This Feature sets the length of time that the parking and dome lights stay on upon
disarming the security system. The longer time allows inspection of the area around and inside the vehicle when dark.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is now set for a 5 second parking and dome light period. Pressing the
small center button will return this Feature to a 30 second period, with the system's response being two siren chirps (or horn honks).
15) Disarm System Upon Trunk Release: Default ON. This Feature causes the security system to automatically disarm when the small center button is
pressed and held to operate remote trunk release. If this Feature is turned OFF, the trunk release will still operate, but the system will remain armed.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is OFF. Pressing the large upper button will turn this Feature ON, with the
system's response being a single siren chirp (or horn honk).
16) Doorlock Pulse Time .8 Or 3 Seconds: Default .8 Second. Some vehicle's power doorlocking systems (example: pneumatic systems) require a longer
output pulse to operate properly. This Feature allows the installer the flexibility to accommodate suchsystems without the added expense of an additional
adaptor.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that the doorlock output pulse is now 3 three seconds. Pressing the large upper button will
return this Feature to the .8 second pulse, with the system's response being a single siren chirp (or horn honk).
17) Double Pulse Unlock (DPU
TM
): Default OFF. This is another Feature provided for the installer's benefit. Some newer vehicles require a double pulse
to remotely unlock the doors and/or to disarm a factory-equipped security system.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with one siren chirp (or horn honk) to indicate that the doorlock output pulse is now a double pulse. Pressing the small center button will
return this Feature to the single pulse, with the system's response being two siren chirps (or horn honks).
18) 3 Or 45 Second Arming Delay: Default 3 Seconds. Some installation situations require an extra period of time for the security system to become fully
armed. Where needed, this Feature may be changed by the installer to delay the full arming of the system to 45 seconds. Please note when the 45 second
arming delay is used, it adds 45 seconds to all three forms of arming: active arming from the transmitter, Last Door Arming, and Automatic Rearming.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that the arming delay is now 45 seconds. Pressing the large upper button will return this
Feature to the 3 second arming delay, with the system's response being a single siren chirp (or horn honk).
Programming Features
