1
Data display
2
Orange led – Activated heating element
3
Cycle programming key
4
Cycle start up programming key / In progress cycle stop key
5
Flashing red led = in progress program
6
Still red led = in progress deferred start up timer
Orange led = rising to programmed temperature
Green led = in progress holding time
7
Value increasing key
8
Value decreasing key
3.2.1 PICTURE NO.2
3.3.1 PROGRAMMING OF CYCLE
To program a cycle follow correctly and as in the indicated order the instructions below:
Turn-on machine
The polymerizing unit is started up by turning the general switch to ON position (I).
The inside green light will light up.
The word OFF will appear on display. All led will be off.
In case numbers appear on display, press START/STOP key to put the polymerizing unit on state of
IDLE-OFF.
- Page 3/9 -
