Cleaning operations must be done with the general switch on OFF (0) position, with the
electrical cable disconnected. Before using cleaning techniques different from the ones
indicated by OMEC Snc, the operator must contact the manufacturing company. Do not place any
objects over the electrical cable and do not put cable in places where it can be stepped
over.
-
In case of extended inactivity disconnect the electrical cable.
-
Before any transportation, always empty the tank and use the original packaging.
-
SIDE IV STANDARDS
4.1.1 STANDARDS
The OMEC POLYMERIZING UNIT TYPE PL.06.00 - PL.12.00 is manufactured in accordance
with Machine Directive:
- 2006/42/EC
with the following Standards:
- EC 88/642
- 2014/30/UE EMC (Electro-magnetic Compatibility)
- 2014/35/UE (Low Voltage)
- UNI EN 60204-1
- UNI EN 60204/1-A1
- Page 9/9 -
