background image

L126B-A01-ENG

6

2. SPECIFIC USE

Intended use lists the admitted uses for which the 

manufacturer designed and constructed the machine.

Only the strict observance of admitted uses guarantees 

safe device use for the operator and exposed personnel. 

For this reason, reasonably foreseeable improper use 

has been identified by the manufacturer according to his 

experience in equipment use.

For this reason, in addition to foreseen use, some but not 

all reasonably foreseeable improper uses are listed in the 

following paragraphs.

2.1 FORESEEN USE

This appliance has been developed and built to lift vehicles 

with at least four wheels and only partially.
One must lift starting from the ground and at least two 

wheels must stay on the ground (front or rear wheels).

The load must not weigh more than the declared capacity 

of the appliance as indicated on the manufacturer’s ID 

plate (Fig. 2).
Don’t lift higher that what can do the lifting appliance. 

Follow manufacturer’s instructions.

Load capacity : 5000 Kg

 

!

WARNING: 

Any uses not explicitly indicated in this manual are considered improper and hence prohibited: 

the manufacturer cannot be held liable for direct or indirect damage or injury to persons, animals or things 

caused by incorrect use of the equipment.

2.2 IMPROPER USE

Some but not all examples of reasonably foreseeable 

improper use are listed below.

•  It is forbidden to use the appliance to support a load.
•  It is forbidden to lift motor vehicles with a weight 

exceeding the capacity of the equipment.

•  It is forbidden to lift persons or animals.
•  It is forbidden to lift motor vehicles carrying people 

and/or animals.

•  It is forbidden to lift motorcycles, motorcycles with 

sidecars or similar vehicles.

•  It is forbidden to lift three-wheel vehicles.
•  It is forbidden to lift special vehicles such as: forklift 

trucks, agricultural machinery and tractors, excavating 

machinery (diggers, excavators, bulldozers, etc.).

•  It is forbidden to lift motor vehicles carrying potentially 

dangerous material (flammable, explosive or 

corrosive materials, etc.).

•  It is forbidden to lift machinery or materials in general.
•  It is forbidden to lift materials or objects (processed 

pieces, tools, etc.).

•  It is forbidden to lift melted metals, acids, irradiating 

materials, very fragile loads.

OMCN S

.p.A.

OMCN S

.p.A.

DOCUMENT

 GENERIQUE DE DIVULGA

TION: DEMANDEZ LE LIVRET

 CORRESPONDANT

 SPECIFIQUEMENT

 A

 L

’AR

TICLE EN VOTRE POSSESSION. DAS IST

 EIN 

DEMONSTRA

TIVGESAMTDOKUMENT

. BITTE FRAGEN SIE FÜR DIE ENTSPRECHENDE BEDIENUNGSANLEITUNG DES 

AR

TIKELS IN IHREM BESITZ.

DOCUMENT

 GENERIQUE DE DIVULGA

TION: DEMANDEZ LE LIVRET

 CORRESPONDANT

 SPECIFIQUEMENT

 A

 L

’AR

TICLE EN VOTRE POSSESSION. DAS IST

 EIN 

DEMONSTRA

TIVGESAMTDOKUMENT

. BITTE FRAGEN SIE FÜR DIE ENTSPRECHENDE BEDIENUNGSANLEITUNG DES 

AR

TIKELS IN IHREM BESITZ.

OMCN S

.p.A.

DOCUMENT

O DIMOSTRA

TIVO GENERALE: RICHIEDERE IL

 MANUALE CORRISPONDENTE 

ALL
’AR
TICOLO IN VOSTRO POSSESSO. GENERAL

 DOCUMENT

 AS 

DEMONSTRA

TION : REQUEST

 THE MANUAL

 SPECIFICALL

Y ISSUED WITH 

THE 

AR
TICLE IN 

YOUR OWNERSHIP

Summary of Contents for 126/B

























































Reviews: