7
Operation
b. Time display.
c.
Symbol for centigrade (if selected).
d.
Symbol for Fahrenheit (if selected).
e. Temperature setting button.
f. Time setting button.
g. In use symbol.
h. Increase time or temperature button.
i. Decrease time or temperature button.
j.
On/Off/Start/Stop button.
OPERATING YOUR PRODUCT
1. Choose a Container large enough to hold your food, with plenty of room for the water to circulate.
Any container will do, but we recommend a polycarbonate food storage container, or a large metal cooking
pot. Avoid plastic containers made with BPAs or PVC materials. If in doubt, check your container is food
safe before use.
2.
Attach the Circulator to the side of the container using the fixing clip.
BETTER NOT place the circulator in the centre of the container, as there is a risk of the appliance falling
over and damaging the appliance. Add water to the container above the MIN water line marked on the
circulator, but below the MAX water line. Remember that adding food to the container will displace the
water and increase the water level, so take this into account when filling your container!
3.
Turn on the Circulator by pressing and holding the On/Off button for 2 seconds. The appliance display will
illuminate, meaning the circulator is ready for use.
If the circulator has not been used before, and the appliance is started at this point, then the default
temperature of 60°C will be displayed, and the default time of 2 hours will be set. If the appliance has been
used before, it will display the last used settings.
4.
Set the Temperature by pressing the TEMP button.
Pressing and holding the TEMP button for 2 seconds will switch the temperature display between
Centigrade and Fahrenheit. Once selected, press the + or - button to increase or decrease the
temperature. Pressing and holding the + or - button will increase or decrease the temperature by 1.0°C.
Pressing and releasing the + or - buttons will increase or decrease the temperature by 0.1°C. The
temperature can be set between 0-90°C / 32-194°F.
5.
Set the Time by pressing the TIME button.
Use this button to set the desired length of time you wish the circulator to operate for. Pressing the time
button will flip between hours and minutes. The circulator can be set for a maximum time of 99hrs.
6. Start/Stop the Circulator by pressing the Start/Stop button. The circulator will begin to circulate the water in
the container, and the in use symbol will be shown on the display.
If the water is below temperature, the heater will be activated, and the circulator will heat the water to the
set temperature. Once at the desired temperature the heater will be turned off, until the temperature drops
below the set temperature, after which the heater will be activated again. This will continue throughout the
cooking cycle.
7. When the water heat to set temperature, the timer start to count down. When the timer set is reached and
the user does not stop the unit, it will continue to work for one more hour and then stop automatically.
A quiet clicking may be heard during this time as the heater is turned on and off to maintain the desired
temperature. This is normal.
