background image

39

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, 

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la 

carte au niveau de la perforation, puis l’envoyer à l’adresse spécifié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at 

the perforation and then send to the address specified below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information
Name:

Company Name:

Address:

Telephone:

City:

Province or State:

Postal or Zip:

Email Address:

Country:

Type of Company:
     Restaurant

     Bakery

     Deli

Dealer from which Purchased:

     Butcher

     Supermarket

     Caterer

Dealer City:

Dealer Province or State:

     Institution 

(specify)

:

Invoice:

     Other 

(specify)

:

Model Name:

Model Number:

Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY):

Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty?      Yes      No

Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour diffusion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Summary of Contents for MX-IT-0080-M









































Reviews: