8
Safety and Warranty
• PROTECTION AGAINST DIRECT CONTACT: the casings have at least an IP 2X - IP 4X protection level.
Opening a casing (doors, lids, etc. ..) containing live parts is possible by means of a key (only for qualified
or trained operators).
• PROTECTION AGAINST INDIRECT CONTACT: the masses are connected to the protection circuit and the
automatic shutdown of the power supply is guaranteed in case of failure.
• PROTECTION AGAINST AUTOMATIC RESTART AFTER SHUTDOWN AND RESETTING THE POWER
SUPPLY: minimum voltage devices are provided whenever the automatic restart may cause a hazardous
condition (interruptions in the power supply).
• MANUAL DISCONNECTION: Manual disconnecting devices (switches) are present on the control
panel allowing to disconnect the entire electrical equipment of a line from the power supply for cleaning,
maintenance and in case of long service interruptions.
Operations on the electrical parts of the machine must only be carried out by technical personnel with
the necessary electrical engineering skills.
BEFORE SWITCHING ON THE POWER, CHECK THAT:
•
The various parts have been mechanically assembled in an appropriate manner and are stable.
• The electrical connections are correct and that power meets the specified limits (e.g. voltage, frequency,
pressure).
• The other (air) systems are properly connected and are within the specified limits.
• The peripheral equipment is connected properly.
• The guards and safety devices are fitted.
• The physical environment is as indicated (for example: correct lighting and noise levels, temperature,
humidity, atmospheric contaminants).
AFTER POWER HAS BEEN SWITCHED ON, CHECK THAT:
• Start, stop and the control devices function as required.
•
Circuits and emergency stop and safety stop devices are functioning.
•
It is possible to disconnect and isolate the external power sources.
• Guards and interlocking devices function as required.
• All the safety devices (fixed enclosures, immaterial barriers, fixed guards) are positioned correctly and are
functioning.
TRAINING THE PERSONNEL
The user must ensure that personnel using the machine is adequately trained and has the skills in carrying out
their duties safely. Training must include at least:
•
Identifying possible hazards.
•
Acknowledgement of the guards and safety measures.
• A clear definition of the tasks assigned.
•
Identifying and explaining all the control devices and all their functions used when carrying out the tasks
assigned.
•
Identifying the hazards associated with the assigned tasks.
The personnel operating with the machine must be informed on the specific risks and receive adequate
Summary of Contents for 45403
