6
Safety and Warranty
and have received the necessary training.
Warning, danger of mechanical moving parts, particularly:
•
Crushing caused by the movements of the pusher and the panel that are moved by pneumatic cylinders.
•
Abrasion due to the grating belts covering the surface of the drums.
•
Conveying and dragging caused by the grating belts covering the surface of the drums compared to the
nearby fixed parts.
Before proceeding with the start-up, use and maintenance operations of the machine, read this manual
carefully and thoroughly make sure that any unsafe condition has been properly removed or reduced
as much as possible. Check that all the safety guards mentioned in these instructions are actually
present and functioning.
Never carry out any cleaning, lubrication or maintenance operations when the machine is in motion or
powered.
Do not wear rings, watches, jewelry, dangling or unbuttoned clothing such as ties, torn clothing,
scarves, unbuttoned or unzipped jackets that can be caught in the moving parts of the machine.
Before starting the machine the operator must verify the presence of any visible faults on the guards
or safety devices:
•
If necessary, inform the maintenance manager.
•
Refrain from carrying out any operations for which authorisation and training has not been previously given.
Beware of hazards due to direct contact!
Operations on the electrical parts of the machine must only be carried out by qualified technical personnel with
the necessary electrical engineering skills, after referring to the wiring diagram and the necessary conditions in
order to avoid electrocution.
Beware of hazards due to indirect contact!
Connection must be earthed and line protection coordination are to be ensured in case of indirect contact in
accordance with the IEC 64-8 regulation.
PROTECTIONS AND SAFETY MEASURES
Below is a guideline on the safety guards adopted in order to eliminate or at least reduce the dangers present
as much as possible. Please note that safety measures are not always in themselves sufficient to completely
guarantee against possible injury; adequate information and training for employees and compliance with the
current safety regulations are also necessary.
It is absolutely forbidden to operate the machine without the guards and safety devices indicated in
these instructions for use.
Summary of Contents for 45403
