10
Installation
TRANSPORT
Transport shall be carried out by qualified personnel so as to avoid any damage to the machine and any of its
components. In particular:
•
All the guards, covers and doors must be properly closed and secured.
• Use a forklift or transpallet with sufficiently long forks and loading capacity.
•
If the forks are not long enough, use two forklifts positioned one facing the other.
• Insert the appropriate equipment supplied with the machine next to the feet which enables the use of the
forks.
The machine should be transported on a flat and solid floor only, free of unevenness.
INSTALLATION
Installation must be carried out by qualified personnel. Connection to the power supply must be carried out
in accordance with the IEC standards and taking into account the necessary measures in order to avoid the
dangers of indirect contact and overcurrent. Once the GRATER is in place, it must be properly levelled by
adjusting the feet’s threaded rods. This must be done by means of an optical level. Please note that when the
grater leaves our warehouse it has already been levelled.
Make sure the GRATER is placed in a sufficiently lit work area. Check that there is enough space around the
machine to move the removable parts and that it is easily accessible for routine and extraordinary maintenance
(at least 500 mm of free space besides the dimensions of removable parts)
When installing the machine the space needed by the operators during the normal working process
with respect to other existing fixed equipment or structures must be taken into account.
The machine is equipped for the earth-connection of conductive metal masses. The connection must
be ensured and carried out correctly in accordance with applicable technical standards. The machine
cannot be used if it is not earthed.
Do not loosen any fitting of connection pipes from parts of the machine until all the remaining pressure
has been exhausted.
Operations on electrical equipment must only be carried out by qualified technical personnel with
the necessary electrical engineering skills, after referring to the wiring diagram and the necessary
conditions in order to avoid electrocution.
Summary of Contents for 45403
