5
Safety and Warranty
•
Safety information necessary to make adjustments during setting and start-up phases.
•
The correct scheduled maintenance with special reference to safety devices.
•
Compliance with the safety and accident prevention regulations in the workplace.
• Reference to control circuit diagrams (electrical and hydraulic).
Only use the machine after carefully reading the present instructions for use
The manufacturer reserves the right to carry out changes without notice and without incurring any penalty
provided that the main technical and safety characteristics remain the same. On delivery make sure that the
equipment has not been damaged during transport and that no accessories are missing. Any complaints will be
accepted only in writing within eight days from the delivery date.
KEEPING THE INSTRUCTIONS FOR USE
The instructions for use and the relevant documentation must be kept in a suitable place close to the
production line and made available to the operators using the machinery. The instructions for use and the
documentation attached (wiring diagrams, pneumatic diagrams, instructions for use of individual components,
etc.) are to be considered as an integral part of the machine’s instructions for use, therefore:
•
They must be kept in a safe place.
• For safety reasons they must be kept up to date and report any significant changes made on the machine.
Before carrying out any maintenance operation, read the instructions for use and the relevant
documentation when necessary. If in doubt contact an authorised technician.
INTENDED AND IMPROPER USE OF THE MACHINE
This GRATER is to be used for grating cheese on the type Parmesan/Grana Padano/Trentingrana. The
Manufacturer does not guarantee correct functioning if you use other type of cheese. The machine is meant for
use in environments and for applications consistent with its design. Any misuse of the machine is prohibited.
The manufacturer is not to be held liable for any errors contained in these instructions or for any injury due to
or arising from the improper use of the machine.
Using the machine for different purposes or with materials other than those intended shall be
considered improper.
GENERAL SAFETY REGULATIONS
Accidents may be caused by: negligence, misuse of machine parts, instinctive reactions in the event of
malfunction or failure. The machine is equipped with safety guards that take into account the possible causes
of injury due to normal negligence or predictable misuse. In particular, the following possible behaviors have
been taken into consideration:
•
Predictable improper behavior due to normal negligence and not due to the deliberate intention of using the
machine incorrectly.
•
A person’s instinctive reaction during use in case of malfunction or breakdown.
•
The behavior that results from the easiest course of action when performing a task.
Operations that are not part of the normal conditions of use should in all cases be carried out by qualified and
authorised personnel who are aware of the hazards, the different operating modes, safe operating procedures
Summary of Contents for 45403
