14
Maintenance
Only qualified, specially trained and authorised personnel should carry out maintenance, cleaning and repair
jobs.
Before carrying out any operation, the following precautions must be taken:
• Switch off the power on the machine panel via the power disconnecting device.
•
Disconnect the machine from the pneumatic supply mains.
At the end of each operation:
• Reset and properly secure all the fixed and/or interlocking guards.
Do not perform any operations without having received specific authorisation and adequate training on
the operating procedures as well as being informed about the possible risks.
No cleaning, lubrication or maintenance operations should ever be carried out whilst the Grater is
operating or powered.
To disconnect the power supply, open the switch located upstream of the flexible power cable or its
plug. If a plug is present, disconnect the plug from the socket
.
Interventions on the electrical equipment of the machine must only be carried out by technical
personnel with specific skills in electrical engineering.
CLEANING THE MACHINE AND ITS COMPONENTS
To keep the grater in perfect working order, regularly clean the machine as described below. The machine
should be cleaned externally and internally on a daily basis. For a more effective internal cleaning it is
advisable to remove the upper and lower parts and direct a jet of water in to the parts that need descaling.
Prior to any cleaning operations, it is necessary to:
• Switch off the power on the machine’s panel via the power disconnecting device.
•
Disconnect the machine from the pneumatic supply mains.
DAILY CLEANING OPERATIONS
The following parts must be cleaned of any food residue by
using food-grade products. Dismantle all the parts that can
be removed as shown in the figure below.
•
The upper casing covering the grater.
•
The product discharging hopper.
•
Inner drum area.
•
Internal hopper.
•
The rear discharge collecting tray.
•
Toothed belts.
The substances used for cleaning the machine which
may come into contact with food must comply with the
food hygiene regulations.
Summary of Contents for 45403
