background image

5

Safety and Warranty

•  To avoid to risk electric shocks and damage to the equipment never use it with wet clothes or shoes and/

or standing on wet floors. Do not plunge it into water nor any other liquid, do not spray water directly to the 

equipment.

•  When the equipment is in operation the operator shall supervise it, principally when children might be near.

•  Unplug the equipment when: It is not in use, before to clean it, before to remove or to place some 

accessory. Before maintenance or any other service.

•  Do not operate the equipment if the cord or plug are damaged. Do not lean the cord on table edges, nor let 

them lie on hot surfaces.

•  When the equipment may have fall, have been damaged any way, or simply does not work, take it to 

technical assistance to check.

• 

The use of accessories not recommended by the manufacturer may cause corporal damages.

•  Keep the hands or any other object away from moving parts while the equipment is in operation.

• 

During operation never wear loose clothes with wide sleeves principally around the wrists.

•  Make sure the equipment voltage and the network voltage are the same, and the equipment has been 

solidly grounded.

•  Before to start the equipment make sure the disc # 02 (Pic.03) and the chamber lid # 05 (Pic.03) are fitted 

securely in their correct position.

•  Do not introduce the fingers nor any other object into the throat use the stomper to feed the processor.

•  Do not introduce the fingers nor any other object inside the processed product unload opening. Keep hands 

away from parts in movement.

•  This equipment has been designed to be used in commercial kitchens, such as restaurants, canteens, 

hospitals, bakeries, meat shops, etc.

The equipment is not recommended when:

• 

It is to be used continuously for industrial production.

• 

Ambient with corrosive or explosive atmosphere or contaminated with water vapor, dust or gas.

IMPORTANT

For enhance operator protection this equipment is provided with a safety system not allowing to be involuntary 

switched ON after an eventual energy shortage.

IMPORTANT

Make sure the cord is in perfect conditions for use. If it is not, change it for a new one in accordance with the 

technical specifications and safety rules. The substitution shall be made by a qualified professional, and shall 

respect the local safety norms.

IMPORTANT

This equipment must not be used by children or any persons with reduced physical or mental aptness, lack of 

experience or knowledge, unless they are under supervision or have received from the person responsible for 

safety, proper instructions on how to use the equipment.

IMPORTANT

Children shall be watched in order to avoid them to play with the equipment.

Summary of Contents for 44532

























Reviews: