background image

8

Safety and Warranty

AFTER FINISHING THE WORK

PRECAUTIONS

Always TURN THE MACHINE OFF before cleaning by removing the plug from the socket. Never clean the 

machine unless it has come to a complete stop. Put all the components back to their functional positions 

before turning the machine ON again. Check the level of oil. Do NOT insert your fingers in between belts and 

pulleys nor chains and gears.

MAINTENANCE

DANGER

Any maintenance with the machine in working situation is dangerous. TURN IT OFF BY PULLING THE PLUG 

OFF THE SOCKET DURING MAINTENANCE.

IMPORTANT

Always remove the plug from the socket in any emergency situation.

WARNING

Electrical or mechanical maintenance has to be undertaken by qualified personnel. The person in charge of 

maintenance has to be sure that the machine is under TOTAL SAFETY conditions when working.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure 

or other damages resulting from installation in non-commercial or residential applications. The right 

is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as 

possible.

1 YEAR PART AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized 

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not 

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classified as normal solid urban waste and can therefore be disposed of 

without difficulty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated 

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Summary of Contents for 44532

























Reviews: