17
400715D-EN
1.
Put the
mixing tube
into the
nozzle body
, then push the
mixing tube
until it sits firmly against the
mixing
chamber
[1].
Figure 23
2.
Hold the
mixing tube
in place, install the
collet
(tapered end toward the
nozzle body
),
O-ring
, and
mixing
tube nut
.
Figure 24
3.
Tighten the
mixing tube nut
by hand.
Figure 25
NOTICE
Do not over or under tighten the mixing tube nut. Over tightening the mixing tube nut can cause the mixing
tube and the orifice to become misaligned and cause damage. Under tightening the mixing tube nut can
cause the mixing tube to come out of the nozzle when high-pressure water is activated.
Summary of Contents for MAXJET 5i 320303 Series
Page 32: ...32 400715D EN...
