Olympus USPM-RUIII Series, Hardware Operation Manual

Page: 82 / 143

8. Details of [Analyze] Menu
PV6253-F4E016 40
8.3.4. [Data information]

Indication of
[Points]
Shows the total number of data present on the graph. The maximum number of data is 50
points.

Indication of [Thickness]
Shows the film thickness of the measured data where the cursor is located.

Indication of [Data Index]
Shows the number of the measurement data where the cursor is located. The data first added
to the graph is assigned the number 1.

[Add]
button
Adds measured film thickness data to a graph. It adds, as the newest data of the graph, the
value currently displayed when the film thickness measurement is valid (the film thickness
panel is displayed) and a film thickness is being measured.

[Delete]
button
Deletes the measured data where the cursor is currently located.

[Close]
button
Closes the window. Even when the window is closed, the graph data is saved till the
program is deactivated.

[<][>] buttons
Move the cursor over a graph.
The measurement unit ("[nm]/"[nd]") is [nm] if physical film thickness was
selected at
[Unit]
of the
[Film thickness measurement]
, or [nd] if optical
film thickness was chosen. Since the measurement unit ruling when the film
thickness graph window was displayed is reflected, be aware that the
measurement unit on the Main Window side will not be reflected when this
window stays open. Also for the unit of the film thickness history data file, the
unit indicated on this panel at the time of saving data will be saved.