manualshive.com logo in svg

Olympus UC50, Installation Manual

Share
Download
Olympus UC50 Installation Manual Download Page 13

 Step 1: Inserting the FireWire board 

13

4

Installation

When installing the camera and the software, it is very important to follow the correct
sequence. By doing so, you'll avoid problems with the installation of drivers.
A PCI-FireWire board is supplied together with the camera. 
If  a  PCI-FireWire  board  has  been  supplied,  please  follow  the  installation  order
shown 

on the left

 in the table below. 

If a PCI 

Express

-FireWire board has been supplied, please follow the installation

order shown 

on the right

 in the table below.

If your PC is not equipped with the necessary slots for the supplied FireWire board,
you can order a suitable FireWire board from Olympus Soft Imaging Solutions.

In the following, you'll find a description of how to install a PCI-FireWire board.

4.1

Step 1: Inserting the FireWire board

The camera is connected to the PC via a FireWire interface. Even if your PC already
has a FireWire interface, you (or the authorized personnel in your company) should
use  the  board  that  is  supplied  with  the  camera.  When  you  do  so,  it  ensures  the
camera's full functionality and avoids any conflicts.
When inserting the FireWire board, please follow the instructions given by the manu-
facturer. Also pay attention to the safety instructions given below:

PCI-FireWire board

PCI Express-FireWire board

Insert the PCI-FireWire board

Install the software

Install the software

Insert the PCI Express-FireWire board

Connect the camera

Connect the camera

Select the camera driver (this is done 

automatically with MS Windows 7/8)

Select the camera driver (this is done 

automatically with MS Windows 7/8)

Danger of electric shock from a plugged-in PC!

When installing hardware on a PC, there is a risk of electric shock.
Be sure to disconnect the power supply before you open the PC!

Injuries caused by sharp metal edges!

The metal edges of the PC and the FireWire board are sharp. You can injure your-
self on them.
Therefore, take care when you open the PC and install the FireWire board. It's a
good idea to wear thin gloves when you do so.

Warning

Caution

Summary of Contents for UC50





































Reviews:

No comments

Brands by name

Popular brands

Load more brands