OLYMPUS Industrial Web Printer Operation Guide Rev.001 12/19
the
Unwinder Control Box
, when paper is changed.
3) The print head may be damaged by paper connection part hitting the print head if the print head is located
at the print position.
4) Do not use the paper with dust on surface, especially at the first part of the new paper. The print head may
be damaged if the dust stuck into the nozzle, and causes the head replacement.
1.1.5. Printer
Unit
1) Do not touch the surface of the print head. The print head ma be damaged, and causes the head
replacement.
2) Must follow the operation manual at the replacing the print head, otherwise ink may damage the print
head.
1.1.6.
Cutter Driving Unit
1) Turn off the
Main Power Knob
at the
Main Power Unit
while replacing the cutter blade.
Otherwise,
there is a danger of injury by roller movement.
2) Do not get any watch or card with mag-stripe closer to the
Cutter Drive Unit
. Otherwise there is a danger
of damage or data erased on the card.
3) Wear a pair of glove while cutter blade replacement. Otherwise there is a danger of injury.
NOTES: Refer to EXHIBIT D PINNACLE DIE CUTTER for the detail.
1.1.7. INK
Handing
1) When the INK Bottle is empty, open the
Lower Front Cover
of the Machine.
2) Put out the empty bottle from folder, and put the new INK bottle into appropriate folder. Before put in,
check that color is matched to this folder.
3) The empty bottle must be handeled according to the local law.
1.2. Installation
Method
Setting method. (Use a bubble level to make sure the unit frame position.)
T.B.D.
1.3. Operation
Procedure
1.3.1.
Power On (Printer Unit)
1) Turn
the
Main Power Knob
on the
Main Power Unit
.
2) Push
the
Master SW
(green button) on the
Main Power Unit
. The
Power Button
on the
Operation
Panel
will be on (amber).
3) Push
the
Power Button
on the
Operation Panel
. The amber light will be changed to green. "Please wait
a moment" will be displayed on the
Operation Panel
.
CAUTION
DANGER
CAUTION
