Olympus LS-100 User Manual Download Page 60

Page: 60 / 137

Creatin

a Mul

ti-

ck Proj

a
b
c

Adjust the recording level

Press the

REC

button to enter the

recording standby mode.

Adjust the

REC LEVEL

dial according to

the sound source (

☞

P. 36).

Start recording

Press the

REC

button.

•

[

] appears on the display, and recording

starts.

Stop recording

Creating a Multi-Track Project

Elapsed recording time

Level meter

Input level meter

Press the

STOP

button.

•

To re-record, record over the same track. It

will not erase the previously recorded file,
which will remain within the project.

2TRKREC

In 2-track recording, the odd number track will be
assigned to the L channel, and the even number
track will be assigned to the R channel.

Input source

Input Mode

Built-in Mic

L/R Input (Stereo)

External Mic

LINE Input

XLR Input

Mono (L) / Mono (R)

Summary of Contents for LS-100










































































































































Search results

Summary of Contents for LS-100

Reviews:

Related manuals for LS-100

Brands by name

Popular brands

Olympus LS-100, User Manual

Search results

Summary of Contents for LS-100

Reviews:

Related manuals for LS-100

Brands by name

Popular brands