Olympus LS-100, User Manual

Page: 127 / 137

127
EN
8
Tr
o
u
b
le
sh
o
o
tin
g
Troubleshooting
Symptom Probable cause Action
Noise is audible
through the
recording monitor
Acoustic feedback is occurring.
When the built-in speaker amps and the like are
connected there is a risk that audio feedback will occur
while recording. It is recommended that you use a
headphone for the recording monitor.
Perform adjustments, such as further distancing the
headphone from the microphone, and not pointing
the headphone at the microphone.
Unable to set index
marks
The maximum number of marks
(99) has been reached.
Erase unnecessary marks (
☞
P. 48).
The file is locked. Unlock the file (
☞
P. 91).
The file is read-only.
Unlock the file or cancel the read-only setting of the file
on the PC.
Cannot recharge
Contains batter y other than
the specified batter y.
Use the supplied rechargeable batteries.
The batter y is not properly
inser ted.
Insert the battery properly.
USB class set to [ Composite ].
Change the USB class setting to [ Storage ] (
☞
P. 110).
Connect the recorder via USB while pressing and
holding the STOP button to recharge it (
☞
P. 24).
Cannot find files Wrong folder. Switch to the correct folder (
☞
P. 34).
Noise heard during
playback
The recorder was wiped or shaken
during recording.
The recorder was placed near a cell
phone or fluorescent lamp while
recording or during playback.
Move the recorder.
Unable to erase a file
The file is locked. Unlock the file (
☞
P. 91).
The file is read-only.
Unlock the file or cancel the read-only setting of the
file on the PC.
Unable to erase a
folder
There is a file that cannot be
recognized by the recorder in the
folder.
Connect the recorder to your PC and erase the folder.
No sound is produced
from a certain track in
the Multi-Track Mode
The track is muted. Cancel the mute condition (
☞
P. 61).
The output volume of the track
is reduced.
Increase the output volume of the track (
☞
P. 62).