Olympus LS-100 User Manual Download Page 129

Page: 129 / 137

129

Ac
ce

ries (

ptio

nal
)

Accessories (optional)

Accessories exclusive to the Olympus voice recorder can be purchased directly from Online Shop
on our company's website.

Stereo microphone: ME51SW

The built-in large-diameter microphone enables

sensitive stereo recording.

2-channel microphone (omni-directional):

ME30W

Two ME30 monaural microphones come in a set

with a miniature tripod and a connection adapter.

These are highly sensitive omni-directional

microphones supported by plug-in power which

are well-suited to recording musical performances.

Compact Gun Microphone (unidirectional):

ME31

This directional microphone is useful for recordings

such as outdoor recording of wild birds singing.

The metal body provides a sturdiness to the high

rigidity.

Monaural microphone (unidirectional):

ME52W

Use this monaural microphone that helps reduce

the effect of ambient noise and record sounds from

a remote location.

Monaural tie clip microphone (omni-

directional): ME15

Small concealing microphone with a tie-clip.

Windjammer: WJ4

Reduces low-frequency wind noise by about 20dB.

Telephone pickup: TP8

This earphone type microphone can be plugged

into your ear while phoning. The voice or

conversation over the phone can be clearly

recorded.

Connecting cord: KA333

This connecting cord has stereo mini-plugs (ø3.5)

with resistance at both ends. Used during recording

to connect the earphone jack output of the recorder

to the external microphone input jack. Converting

plug adapters (PA331/PA231) that convert to the

monaural mini plug (ø3.5) or monaural mini plug

(ø2.5) are also enclosed.

Connecting cord: KA334

This connecting cord has stereo mini-plugs (

3.5)

with resistance at both ends. Set [

Input Select

] to

[

Line

] on the recorder.

Exclusive remote control set: RS30W

When the receiver is plugged into the REMOTE jack,

the recorder's recording and stop functions can be

operated through the remote control. The receiving

position can be adjusted, thereby allowing you to

operate the recorder from various different angles.

Summary of Contents for LS-100










































































































































Search results

Summary of Contents for LS-100

Reviews:

Related manuals for LS-100

Brands by name

Popular brands

Olympus LS-100, User Manual

Search results

Summary of Contents for LS-100

Reviews:

Related manuals for LS-100

Brands by name

Popular brands