Olympus LS-100, User Manual

Page: 44 / 137

44
EN
3
Re
co
rd
in
g
Recording
Important Notes on Recording
▌
•
When you have an SD card inserted in the
recorder, make sure to check if your memory
selection is set to [
Internal memory ] or [ SD
card ] (
☞
P. 108).
•
To prevent losing the beginning of your record-
ing, make sure the recording indicator is lit
before recording.
•
When the remaining recording time is down to
60 seconds, the PEAK indicator light (R) starts
flashing; as the time winds down (to 30 seconds,
10 seconds, etc.), the light starts to flash faster.
•
No more recordings can be made when [ Folder
full ] appears. Select another folder, or delete
unnecessary files before continuing to record
(
☞
P. 50).
•
No more recordings can be made when
[ Memory full ] appears. Delete unnecessary
files before continuing to record (
☞
P. 50).
•
The performance of the recording medium may
decrease after repeated writing and erasing.
When this occurs, try formatting the recording
medium (
☞
P. 114).
Recording using the metronome
You can use the metronome to help you keep
accurate tempo during recording.
1
Set
[ REC Mode ] to [
Normal
]
(
☞
P. 80).
2
Set
[ Metronome Menu ] to [
On
]
(
☞
P. 101).
3
Select [ Setting ] and set [ Display ]
to [ On ] (
☞
P. 101).
•
You can change the tempo and
pattern of the metronome in [ Setting ]
in [ Metronome Menu ].
4
Connect headphones to the EAR
jack of the recorder.
7
Press the REC button to start
recording.
•
If you have set [ Countdown ],
recording starts when the metronome
reaches the set count after starting.
•
The sound of the metronome will not
be recorded.
8
Press the STOP button to stop
recording.
•
When you stop recording, the
metronome will stop as well.
5
Press the REC button to enter the
recording standby mode.
6
Adjust the recording level.
•
You can adjust the tempo of the
metronome by pressing the +/-
button.