manualshive.com logo in svg

Olympus HSMT-Compact, User Manual

The Olympus HSMT-Compact is a top-of-the-line camera designed for high-resolution photography. Capture stunning images and explore its range of advanced features with ease by accessing the comprehensive User Manual, available for free download from our website. Maximize the potential of your camera and unleash your creativity today!

Share
Download
background image

DMTA017-01EN, Rev. F, August 2016

Scanner Assembly and Setup

 

23

Figure 2

‑

6  Scanner with frame extended beyond wheel limits

2.2

Attaching the Umbilical Cable

The umbilical cable can be attached to the HSMT-Compact scanner using the 
umbilical bracket (see Figure 2-7 on page 24).

Summary of Contents for HSMT-Compact































































Reviews:

No comments

Related manuals for HSMT-Compact

Canon CanoScan LiDe 50 Quick Start Manual preview
CanoScan LiDe 50
Brand: Canon Pages: 16
Unitech MS912 Quick Reference Manual preview
MS912
Brand: Unitech Pages: 14
Obdmate om520 User Manual preview
om520
Brand: Obdmate Pages: 36
Renkforce 2300623 Quick Manual preview
2300623
Brand: Renkforce Pages: 4
Idemia MSO1300 Installation Manual preview
MSO1300
Brand: Idemia Pages: 38
Draminski SONOFARM mini User Manual preview
SONOFARM mini
Brand: Draminski Pages: 24
Ambir DS485 User Manual preview
DS485
Brand: Ambir Pages: 12
Pandigital PANSCN10 User Manual preview
PANSCN10
Brand: Pandigital Pages: 44
UMAX Technologies PowerLook 180 User Manual preview
PowerLook 180
Brand: UMAX Technologies Pages: 7
UMAX Technologies PowerLook 1120 Operation Manual preview
PowerLook 1120
Brand: UMAX Technologies Pages: 16
Autel MaxiDiag MD805 Manual preview
MaxiDiag MD805
Brand: Autel Pages: 85
Canon imageFORMULA P-215 Reference Manual preview
imageFORMULA P-215
Brand: Canon Pages: 55
Honeywell Xenon 1932 Quick Start Manual preview
Xenon 1932
Brand: Honeywell Pages: 17
Honeywell Xenon 1902h Quick Start Manual preview
Xenon 1902h
Brand: Honeywell Pages: 15
Honeywell Xenon 1902HC Quick Start Manual preview
Xenon 1902HC
Brand: Honeywell Pages: 16
Honeywell Xenon 1500 User Manual preview
Xenon 1500
Brand: Honeywell Pages: 176
Xerox DocuMate 3640 Specifications preview
DocuMate 3640
Brand: Xerox Pages: 2
imacon Flextight Progression User Manual preview
Flextight Progression
Brand: imacon Pages: 226

Brands by name

Popular brands

Load more brands