DMTA017-01EN, Rev. F, August 2016
Chapter 2
24
Figure 2
‑
7 Umbilical
‑
cable attachment and bracket
To attach the umbilical cable
1.
Press the locking pin on the umbilical bracket, slide the mounting hole over the
attachment on the HSMT-Compact scanner, and then release the pin (see
Figure 2-8 on page 24).
Figure 2
‑
8 AEIX378 umbilical
‑
cable attachment
2.
Loosen the strap, wrap it around the umbilical cable, then reinsert the strap into
the buckle and tighten it (see Figure 2-9 on page 25).
Attachment
Umbilical bracket
Locking pin
Mounting hole
Summary of Contents for HSMT-Compact
