DMTA029-01EN, Rev. E, December 2017
Chapter 3
50
3.
Lock the X-axis by using the locking device (see Figure 3-1 on page 50).
Figure 3
‑
1 Knob engages inwards to lock the X
‑
axis
4.
Pull the increment knob for the Y-axis into the free-running position (see
Figure 3-2 on page 50).
Figure 3
‑
2 The increment knob in the free
‑
running position
5.
Unlock the Y-axis.
6.
Move the Y-axis encoder module across the inspection surface (see Figure 3-3 on
page 51).
Summary of Contents for GLIDER
