DMTA029-01EN, Rev. E, December 2017
Scanner Assembly and Setup
23
Figure 2
‑
9 Pushing the tube into the frame (
left
) and tightening the screws (
right
)
5.
Remove the frame nut on the open end of the frame, and push the tube into the
frame slot past the frame end (see Figure 2-10 on page 23).
Figure 2
‑
10 Removing the nut (
left
) and feeding the tube to the frame end (
right
)
6.
Slide the module back onto the frame, and then pull back the tube just enough to
slide the frame nut back into the end of the frame (see Figure 2-11 on page 24).
Summary of Contents for GLIDER
